For those who are following us on instagram you already know that we like to play around with different vinyl color configurations. We thought it might be interesting to share a few of our best results of the past few months. As you can see we aim to offer a nice looking vinyl that fits the artwork as good as possible.
Yes! This is still on! It's been a while since you heard from us but that doesn't mean we were giving up. On the contrary! We've been spending a lot of time and energy to get the right machines in the right place and that part of the plan is coming together now. And we spent some time at dunk!festival of course.
Last wednesday was a cold one, so we looked like Winter Olympics athletes. The wooden skeleton for the walls is completed. Next? The roof! Temperatures will drop below freezing point, so exciting times (brrr) are ahead.
It's been a while since our last update but that's because we've been very busy actually constructing the building. While the concrete was drying, wood deliveries came in so we could start constructing as soon as the concrete was strong enough. With the building taking shape we're getting more and more exciting to install those machines. We conquer rain, winds, snow, freezing temperatures,... to be able to have this thing up and running as soon as possible!
First day of work in 2018 and it was an excellent day: we have a floor now! The day started at 07:00 and the polishing is still going on at this time (21:00). Three trailers of concrete were just enough to fill the entire 'basin' that we prepared at the end of 2017. Now it's a matter of waiting for the concrete to be hard enough to start construction works. But before that we still have to do some digging to connect water, electricity, gas,... to the main pipes.
Today we finished most ground works and applied a layer of recycled glass in the shape of rocks. Weird matter but the perfect base layer for a concrete floor and a lot more eco friendly than the other solutions we were looking into. We spread out 11 big bags each weighing 200kg with just a shovel and a few wheelbarrows.
The building is mostly going to be assembled with wood and recycled paper (insulation) but of course we need a solid base. So after installing a basic sewage system we had the concrete foundation coming in today. Next steps are bringing in a layer of recycled glass (looking like small pumice rocks) to avoid the cold coming up from the ground, placing temporary borders and then having a layer of concrete (with metal fibers) spread out on top of all that...
Today we went to the bank to sign our loan and make sure there's money to have everything installed. A few weeks ago we were able to reserve a second hand Newbilt press (only 8 months old) with extruder, trimmer and hydraulic aggregate. Today we were able to pay for all this so now it's just a matter of going to Germany to pick it up once the building is complete.
After having a great time at dunk!USA we planned to stick around and enjoy that part of the USA. We made sure Detroit was on our route to visit Third Man Pressing and see if we could learn anything there. We didn't have an appointment with someone at the factory but I was glad to see that the store had a big window to the production floor with all the Newbilt presses installed.
While waiting for the construction approval and loan to be confirmed we were invited to go and see a Warmtone machine by Viryl Technologies at work in Portsmouth. This one is fully automatic and has lots of sensors and is even connected to the internet for monitoring. So in September 2015 we took the car onto the ferry to Portsmouth, England...
Special moment! Today we bought the first part for our own vinyl pressing plant: a second hand cooling tower with the perfect specifications for our setup. We went to Tilburg, NL to pick it up ourselves.
Since we needed a bigger space to store our dunk!records operation we were redesigning those plans to make it big enough to set-up a pressing unit as well. Just in case these plans were going to be executed. The plans looked very promising!
On April 7th we went to Copenhagen, Denmark to visit a brand new vinyl factory working with the Newbilt presses in the exact same set-up as we were looking for. Newbilt is making new presses based on the technology that is being used be the industry forever. The machines we are looking at are manual machines that allow for more color customization and that are slightly cheaper than a fully automatic machine...
In February we actually came up with the idea to start pressing our own vinyl. That gives us total control about quality, colors, timing and we skip the dangerous journey for the vinyls to get from the factory to us. So less chance of damaged goods, delays, flaws,... This was gonna be our next move and it's gonna be fun...
Pressing this one for @dunkrecords for an exclusive pre-sale at @dunkfestival in two weeks.
Screenprinted D side for @oldsolarmusic released on @dunkrecords and @athousandarms printed by #printclinic.
Pressing the new @oldsolarmusic album for @dunkrecords and @athousandarms It’s now availabe for pre-order at athousandarms.com and dunkrecords.com #postrock #pressingvinyl #splatteredvinyl #coloredvinyl
We’re pretty happy how ‘Eigengrau’ by @girihband turned out looking beautiful and sounding excellent. Pressed for @dunkrecords and @athousandarms #postrock #splatteredvinyl #vinylpressing #pressingvinyl #vinyl #splatter
Orange with black smoke for @coastlandsofficial and @dunkrecords #coloredvinyl #vinylpressing
‘Every Nothing’ by @tidesofman was the first plain white vinyl we pressed. And that’s a lot more difficult than it sounds... Proud to be part of this release. Available at @dunkrecords #vinylpressing #blackandwhite
Color experiment! #pressingvinyl #coloredvinyl #vinyl
Doing some pressing for @dunkrecords and @athousandarms today. Sound quality approved! #splatteredvinyl #pressingvinyl #vinyl #postrock
This dunk!pressing was released today! ‘Call Of The Void’ by @celestialwolves comes on 180g transparent dark yellow vinyl. #postrock #vinylpressing #transparentvinyl